BCI Range (US)

Tubular Positive Plate

• Excellent interface with the active mass
• Higher power density
• High tensile strength, corrosion resistance

Positive Active Mass

• Efficient formation ensures that full cell capacity is achieved after 3-5 cycles
• Uniformly filled positive plates, 100% weight controlled
• Constant quality, homogeneous tamped density
• Long service life, high conductivity, increased performance

Gauntlet
Prevents mass shedding, high mechanical stability

Bottom Bar
Provides space for the unavoidable growth of the spine

Negative Grid
High tensile strength, corrosion resistance, low water consumption

Negative Active Mass

• Constant quality
• Consistency of the Negative Active Mass

Separator
Increased performance preventing short-circuits

Formation & Activation
Constant quality in each and every cell

Electrolyte
Long life performance

Pole Terminal
Uses the unavoidable growth of the plates to press against the grommet and improve the sealing

Pole Bridge
Consistent & uniform composition ensures superior connections

Bolt-on Connector
Allowing easy replacement of cells on the field

Lid
Polypropylene reinforced lid thermo-welded to the container in black or grey color

 Cell Container
Polypropylene container, with sufficient sediment space

 Operational Vent Plug

•  No need to remove vent cap–flip and fill
• Installs with 1/4 turn Snap lock lid

Inter-cell Connector
Fully insulated flexible bolt-on cable connectors

• Allows fast and easy cell replacement
• Reduces time & cost

Batteries with weld-on poles and connectors are also available

• Allowing permanent and robust connection between cells
• With insulated protection covers

Bolt

• Plastic-head connector bolt
• Touch proof insulated with voltage measurement point

 Battery Connectors (End Plugs & Sockets)
Available in the following types:

• Flat pole connectors with color coding
• DIN Type connectors according to DIN 43589 also available

Exit Cables

• Insulated color marked cables
• Prevent short circuit and allow correct and fast installation

Tray

• Made of steel
• Protected with plastic powder coating (standard configuration)
• Durability
  • Corrosion protection
  • Available in various sizes and colors
  • Available both with drainage hose (EU type) or drainage holes
• 100% spark tested

Tubular Technology Advantages

• Higher power density through excellent active mass utilization
• Better resistance to acid stratification
• Smaller corrosion rate
• Alloy with optimized Sb (antimony) levels

Higher cycle life

• Motive Power batteries can be used in all kinds of forklift trucks, cleaning machines and other electric vehicles.
• They are available in all kinds of voltage configuration and forms

Motive Power BCI Cells & Batteries