Ευκαιρίες καριέρας

  • Αρχική σελίδα
  • Ευκαιρίες καριέρας

  • SYSTEMS SUNLIGHT S.A. ranks among the world's top multinational producers of energy products and systems while is active in the design, production and distribution of batteries with a manpower that exceeds 1000 employees in Greece and abroad. With a production range of more than 1,500 specialized products, SYSTEMS SUNLIGHT S.A. covers the energy needs of sectors with particularly high demands, including Industry, Transportation, Telecommunications, Defense, Construction and Infrastructure.

    Our company seeks to hire an Electrical or Mechanical Engineer to join our factory’s Research and Development department for advanced Batteries in Xanthi, Greece as

    Your role:

    • Definition of road map and system architecture
    • System Design and realization
    • Conception and development of hardware and software for electrical control units, battery control and test systems
    • Design of analog and digital wiring incl. interface adjustment
    • Development, prototype assembly, implementing and test of functional units and prototype groups
    • Engineering Steering
    • System Qualification and Verification incl. product safety
    • Configuration management
    • Supporting Integrated logistic System
    • Customer Support and training

    Candidate profile / Requirements:

    • Completed academic studies at a university or advanced technical college as graduate engineer in Electrical Engineering or comparable education
    • min. 5 years appropriate professional experience
    • Good knowledge of measurement technology / control technology
    • Good knowledge in design of digital and analog wiring
    • Experience with layout preparation
    • Knowledge of BUS-systems (CAN, Ethernet)
    • Knowledge of embedded devices in control electronics
    • Knowledge of microcontroller-programming
    • Experience in implementation of standard rules to achieve the product safety according to Product Safety Act and industry standard rules (e.g. VDE guidelines)
    • Ability to independently become acquainted with complex issues
    • Willingness to work in a team
    • Good knowledge of MS Office (Word, Excel and Access)
    • Good knowledge of English spoken and written
    • Willingness for occasional traveling worldwide
    code:
    hardware / software and embedded systems
    location : Xanthi, Greece 12/03/2020

    Our company seeks to hire an Electrical Engineer to join our factory’s Research and Development department for advanced lithium Batteries in Xanthi, Greece as

    Main Responsibilities


    The successful candidate supports and participates as follows:

    • Development engineer (HW / SW) in the field of communications engineering / sensor signal processing / networked processor systems
    • Design and development of hardware and hardware-related software for sensors, control units and storage units
    • Interface adaptations, bus systems
    • Commissioning and testing
    • If necessary, take over project management and system analysis
    • Interface development to the common bus systems (CAN / Ethernet), implementation and testing up to hardware-related software development in C / C ++
    • Creation of manufacturing documents and product documentation in cooperation with the design department
    • Coordination with the design, development departments and manufacturing

    Candidate profile:

    • University degree in Engineering, focus on electrical engineering or comparable training
    • Electronic circuits experience
    • some years of relevant professional experience
    • Experience in C / C ++ programming (Visual Studio)
    • Knowledge / experience with embedded devices
    • Hardware-related software development (e.g. CAN)
    • Embedded compiler
    • Good knowledge of measurement technology / sensor signal processing
    • Ability to train yourself with complex issues independently
    • Ability to work creatively and independently
    • Willingness to work in a team
    • Good knowledge of MS Office (Word, Excel and Access)
    • Good written and spoken English knowledge
    • Willingness to travel occasionally worldwide
    code:
    Electrical engineer hardware / power electronics
    location : Xanthi, Greece 12/03/2020

    Our company seeks to hire an Electrical Engineer to join our factory’s Research and Development department for advanced lithium Batteries in Xanthi, Greece as

    Main Responsibilities


    The successful candidate supports and participates as follows:

    • as a HW development engineer in the field of control and electronics
    • Design and development of Batterie hardware, electronic. Control units, small drives and battery controls
    • Design of analog and digital circuits including interface adaptations
    • Development, prototype construction, commissioning and testing of functional units and assemblies
    • If necessary, take over segment management and system analysis
    • Interface development to the common bus systems (CAN / Ethernet), implementation and testing up to hardware-related software development in C / C ++
    • Definition and verification of requirements
    • Proof of product safety with compliance with legal and customary regulations
    • Creation of manufacturing documents and product documentation in cooperation with the design department
    • Coordination with the design, development departments and manufacturing
    • Use of IT tools
    • Execution of simulations

    Candidate profile:

    • University degree in Engineering, focus on electrical engineering or comparable training
    • some years of relevant professional experience
    • Good knowledge of measurement technology / control technology
    • Good knowledge of the design of digital and analog circuits
    • Experience with layout creation is desirable
    • Knowledge of BUS systems (CAN, Ethernet)
    • Knowledge of embedded devices in control electronics is desirable
    • Knowledge of microcontroller programming
    • Experience in implementing the regulations to achieve product safety in accordance with the Product Safety Act and industry standards (e.g. VDE guidelines)
    • Ability to train yourself with complex issues independently
    • Willingness to work in a team
    • Good knowledge of MS Office (Word, Excel and Access)
    • Good written and spoken English knowledge
    • Willingness to travel occasionally worldwide
    code:
    System / Product Engineer for Industrial Lithium Ion Batteries
    location : Xanthi, Greece 12/03/2020

    Our company seeks to hire an Electrical Engineer to join our factory’s Research and Development department for advanced Batteries in Xanthi, Greece as

    Main Responsibilities / Task Description:

    • System Design and realization
    • Conception and development of hardware and software for electrical control units, battery control and test systems
    • Design of analog and digital wiring incl. interface adjustment
    • Development, prototype assembly, implementing and test of functional units and prototype groups
    • Engineering Steering
    • Definition and verification of requirements
    • System Qualification incl. product safety
    • Configuration management
    • Supporting Integrated logistic System
    • Customer Support and training

    Candidate profile / Requirements:

    • Completed academic studies at a university or advanced technical college as graduate engineer in Electrical Engineering or comparable education
    • some years appropriate professional experience
    • Good knowledge of measurement technology / control technology
    • Good knowledge in design of digital and analog wiring
    • Experience with layout preparation
    • Knowledge of BUS-systems (CAN, Ethernet)
    • Knowledge of embedded devices in control electronics
    • Knowledge of microcontroller-programming
    • Experience in implementation of standard rules to achieve the product safety according to Product Safety Act and industry standard rules (e.g. VDE guidelines)
    • Ability to independently become acquainted with complex issues
    • Willingness to work in a team
    • Good knowledge of MS Office (Word, Excel and Access)
    • Good knowledge of English spoken and written
    • Willingness for occasional traveling worldwide
    code:
    Service Engineer for Industrial Lithium Ion Batteries
    location : Xanthi, Greece 12/03/2020

    Our company seeks to hire an Electrical or Mechanical Engineer to join our factory’s advanced Batteries department in Xanthi, Greece as

    Main Responsibilities / Task Description:

    • System Design and realization
    • Conception and development of hardware and software for electrical control units, battery control and test systems
    • Design of analog and digital wiring incl. interface adjustment
    • Development, prototype assembly, implementing and test of functional units and prototype groups
    • Engineering Steering
    • Definition and verification of requirements
    • System Qualification incl. product safety
    • Configuration management
    • Supporting Integrated logistic System
    • Customer Support and training

    Candidate profile / Requirements:

    • Completed academic studies at a university or advanced technical college as graduate engineer in Electrical Engineering or comparable education
    • some years appropriate professional experience
    • Good knowledge of measurement technology / control technology
    • Good knowledge in design of digital and analog wiring
    • Experience with layout preparation
    • Knowledge of BUS-systems (CAN, Ethernet)
    • Knowledge of embedded devices in control electronics
    • Knowledge of microcontroller-programming
    • Experience in implementation of standard rules to achieve the product safety according to Product Safety Act and industry standard rules (e.g. VDE guidelines)
    • Ability to independently become acquainted with complex issues
    • Willingness to work in a team
    • Good knowledge of MS Office (Word, Excel and Access)
    • Good knowledge of English spoken and written
    • Willingness for occasional traveling worldwide
    code:
    PROTOTYPING ELECTRICAL ENGINEER
    location : Xanthi, Greece 12/03/2020

    Our company seeks to hire Prototyping Electrical Engineer to join our factory in Xanthi, Greece as

    Main Responsibilities / Task Description:

    • System Design and realization
    • Provide hands on code implementation/debugging/development and testing of systems
    • Innovate and develop new processes and tools to improve productivity
    • Review and establish electrical testing procedures
    • Diagnose and find solutions for electrical and mechanical issues
    • Ability to read and understand electrical schematics, datasheets, and wiring diagrams
    • Designing, simulating, prototyping, and testing of electrical systems
    • Collaborating in a team environment across engineering disciplines
    • Designing schematics, completing board layouts, assembling, testing, debugging, and integrating designs into electro-mechanical systems
    • Start-to-finish ownership of the systems - from specification to design through prototype, and supporting scaled production/manufacturing
    • Provide characterization and test of designed batterie system
    • Create test plans, design test equipment and undertake testing procedures to verify design performance (includes test fixture bring up and automation).
    • Create documentation and specifications suitable for prototyping, quoting and production.
    • Work with contract manufacturing partners through the design-for-manufacturing process and engineering verification stages required to move the product from prototype to production.
    • Apply creative problem solving to new technical areas.

    Candidate profile / Requirements:

    • MS degree in Electrical Engineering or Mechatronic Engineering or equivalent industry experience
    • Demonstrated experience thriving in a fast-paced research and development and/or laboratory environment
    • Experienced in prototyping
    • Good verbal and written communication skills; able to produce easily understood documents
    • Must be self-starter with drive to learn, ability to handle multiple projects, team player
    • Ability to debug/diagnose embedded hardware/software systems.
    • Experience with prototype projects that require Electrical Engineering or Mechanical Engineering fundamentals
    code:
    TEST ENGINEER
    location : Xanthi, Greece 12/03/2020

    Our company seeks to hire a Test Engineer to join our factory in Xanthi, Greece as

    Main Responsibilities / Task Description:

    • Development of test systems for the validation of lithium Ion Batteries and battery systems
    • Execution and documentation of all tests to ensure product safety, performance and quality
    • Further development and optimization of test methods
    • Presentation of the test results and the test status in the project team
    • Start-to-finish ownership of the Task
    • Provide characterization and test of designed batterie system
    • Create test plans, design test equipment and undertake testing procedures to verify design performance (includes test fixture bring up and automation).
    • Create documentation and specifications suitable for prototyping, quoting and production.
    • Work with contract manufacturing partners through the design-for-manufacturing process and engineering verification stages required to move the product from prototype to production.
    • Adjustment of the software functions for special tests
    • Implementation of customer requirements in test processes, plans, partially automated and fully automated tests
    • Possibly. Coordination of external audits
    • Evaluation, presentation and explanation of the test results
    • Development of solutions / optimizations in a team and a apply creative problem solving to new technical areas
    • Support of product approvals for the target markets
    • Support in planning the required resources (manpower, external costs) for the project-related exams and certifications
    • Participation in FMEAs and processing of the assigned FMEA points
    • Cooperation with external service providers
    • Creation and review of test plans for comprehensive protection of battery systems and their components
    • Provision of test results for prototype acceptance
    • Creation of test reports and introduction of recommendations for product improvement
    • Review and establish electrical testing procedures
    • Collaborating in a team environment across engineering disciplines

    Candidate profile / Requirements:

    • MS degree in Electrical Engineering or Mechatronic Engineering or equivalent industry experience
    • good knowledge of the battery-specific test methods
    • Comprehensive knowledge of environmental simulation
    • Routine handling of measurement technology (data acquisition and evaluation)
    • good knowledge of battery systems and their components
    • Demonstrated experience thriving in a fast-paced research and development and/or laboratory environment
    • Good verbal and written communication skills; able to produce easily understood documents
    • Must be self-starter with drive to learn, ability to handle multiple projects, team player
    • Ability to debug/diagnose embedded hardware/software systems.
    code:
    Mechanical Engineer
    location : Xanthi, Greece 12/03/2020

    Our company seeks to hire a Mechanical Engineer to join our factory΄s Research and Development department for advanced lithium Batteries in Xanthi, Greece.



    Our company seeks to hire a Mechanical Engineer to join our factory’s Research and Development department for advanced lithium Batteries in Xanthi, Greece.

    Main Responsibilities

    The successful candidate supports and participates as follows:

    • Battery design (cases, components, assembly drawings, etc.)
    • Defining components, creating specifications and requirements
    • BOM creation (Bill of Materials)
    • Drafting instructions for production and Quality control
    • Participating in the creation of Production Flowcharts

    Candidate profile:

    • University degree in Engineering (Mechanical or Electrical Engineering)
    • Solid knowledge of AutoCad 3D
    • PC Literate (MS Office, SAP or other ERP System
    • Very good command of English
    • Experience in industrial design
    • Experience in photorealistic design (rendering, design program Inventor)
    • Electronic circuits experience
    • Familiarity with mechanical strength tests: Vibration, Shock tests
    • Willing to travel

    The company offers :

    • Attractive remuneration package and benefits
    • Dynamic and creative environment
    • Dynamic and creative environment
    • Career Opportunities.
    code:
    Sales Operations Support Specialist (SOSS 0220)
    location : Athens, Greece 12/03/2020

    Our company seeks to hire a Sales Operations Support Specialist (SOSS 0220), based in Athens. The role will be reporting to the Sales Operations Support Supervisor and will act as an advocate and liaison between internal departments, customers and Sales to ensure that the needs and requests of our customers are understood and satisfied.

    Your role:

    The successful candidate supports and participates as follows:

    • Track order accuracy and execution through process flow to ensure best possible outcome for clients;
    • Support Sales department in tenders and relevant documents preparation;
    • Monitor and manage customer requests through ERP system (SAP);
    • Monitor order progress to ensure customer expectations for delivery are communicated and met;
    • Submit order progress reports showing level of service and customer rate satisfaction as per pre-defined KPIs;
    • Provide feedback to management on problematic cases and areas for continuous improvement by taking into consideration customer needs and requests;
    • Provide administrative support to the department and coordinate with internal and external clients on various cases.

    Your profile:

    • Bachelor’s degree;
    • At least 5 years of similar working experience in sales support or customer service, ideally in the industry sector;
    • Good knowledge of SAP and MS Office applications;
    • Ability to speak, read and write fluently in English; knowledge of Spanish and/or French are a major plus;
    • Outstanding verbal and written communication, active listening skills;
    • Adaptable, strong problem-solving skills, attention to detail and critical thinking;
    • Helpful and proactive manner with a customer service orientation;
    • Great interpersonal and administrative skills.

    We offer:

    • Attractive remuneration package and benefits;
    • Dynamic and creative environment;
    • Career Opportunities.
    code:
    Operations Administrator (junior level)
    location : Athens, Greece 12/03/2020

    SUNLIGHT Recycling is the Lead-acid Battery Recycling arm of SYSTEMS SUNLIGHT S.A., expanding the business ecosystem developed by Olympia Group and today forms part of the most advanced lead-acid battery recycling plant in Europe. Our company seeks to hire an Operations Administrator (junior level) to provide administrative support with all environmental aspects related to the battery recycling plant. The role reports to the Operations Manager and is based in Athens, Greece.

    Responsibilities:

    The successful candidate supports and participates as follows:

    • Check required documentation for imports of hazardous/nonhazardous waste;
    • Prepare required documentation for exports of hazardous/nonhazardous waste;
    • Check, archive and register all incoming materials;
    • Communicate with authorities for wastes’ transportation;
    • Coordinate waste transportation in compliance with the applicable environmental legislation.

    Desired Skills and Experience:

    • University Degree in Environmental Engineering;
    • 1-2 years of working experience;
    • Excellent command of the English language (written & oral) – knowledge of Italian is desirable;
    • Multi- tasking, willing to take initiatives and take quick decisions;
    • Team spirit work;
    • Ability to work under pressure.

    We offer:

    • Competitive salary package;
    • Private medical insurance;
    • Dynamic and modern environment;
    • Continuous learning and development.
    code:
    Marine Lithium Product Manager (PMML 0120)
    location : Athens, Greece 12/03/2020

    Our company seeks to hire a Marine Lithium Product Manager (PMML 0120), based in Athens. The role will be reporting to the Supervisor of Lithium PM and will be responsible for understanding the needs and applications, product features design, project management and commercialization of products dedicated to marine applications. We will only consider applications from candidates who are coming from the marine industry (engines, construction, design, maintenance, etc.) and who also have commercial background within the following areas: product management, sales engineering or pre-sales.

    Your role:

    The successful candidate supports and participates as follows:

    • Deep understanding of product requirements and application specifications;
    • Competition, technology and market monitoring in order to form internal reports and proposals for new strategic initiatives;
    • Form proposals on new product developments, and coordinate new product development projects;
    • Pricing analysis – submit proposals to Management on price adjustments;
    • Create product and market presentations in order to highlight product benefits / explain business trends / support management’s decisions;
    • Sales and customer’s training on product specifications and benefits;
    • Support Marketing Communication department on new promotional material development;
    • Pre-sales support: Collect product and technical documentation within the organization in order to reply to customer RFQs, propose product solutions to customer requests, and provide technical information according to customer requirements. Make basic sizing calculations in order to propose optimal cost-effective solutions that meet customer needs;
    • Product database maintenance.

    Your profile:

    • Bachelor’s degree from a recognized institution in Electrical or Mechanical Engineering, MBA would be an asset;
    • 5-15 years of experience in engineering or product management position (in the electrical design or electrical maintenance/or boat electrical engineering) and a broader understanding of how the batteries and the engines interact inside the boat with vital electric and electronic systems as well as power generation;
    • Aptitude in standard numerical exercises (P&L, sales reports, navigation through figures, pricing, margins);
    • Fluency in English, both verbal and written. Other languages will be highly appreciated;
    • Proficiency in Excel & Power Point is mandatory;
    • Positive attitude, team spirit, strong work ethics and passion for managing projects to conclusion on time;
    • Excellent communication, presentation and analytical skills;
    • Ability to absorb and transmit product knowledge;
    • Ability to manage multiple priorities, projects and a complex product portfolio;
    • Ability to travel.

    We offer:

    • Attractive remuneration package and benefits;
    • Dynamic and creative environment;
    • Career Opportunities.
    code:
    IT Technical Consultant for Manufacturing Execution Systems (MES) Applications Development
    location : Xanthi, Greece 12/03/2020

    Our company seeks to hire a IT Technical Consultant for Manufacturing Execution Systems (MES) Applications Development based in our factory in Xanthi In the context of SYSTEMS SUNLIGHT digital transformation strategy, heading towards adopting industry 4.0 best practices for transforming its manufacturing plants in Greece and abroad into Smart Factories, Manufacturing Execution System (MES) is the basis for achieving manufacturing excellence.We are looking for an ambitious IT technical consultant, who is willing to become an MES expert. The position is based in Xanthi, Greece.You will take responsibility for end-to-end MES project implementation, which includes design, configuration, testing, commissioning and support of the implemented MES solution, as well as rolling it out in all SYSTEMS SUNLIGHT�s production processes and its manufacturing plants.

    Moreover, you will:

    • Be trained by the solution provider in order to get in depth knowledge of the MES solution.
    • Configure, test, deploy and roll-out the MES solution across all manufacturing plants.
    • Integrate MES solution with other systems, such as ERP, BI, PLM, PM, QMS, EMS, etc.
    • Build customized reports for monitoring production performance.
    • Provide technical support of the implemented MES solution, by working every day with production process owners.

    Qualifications:

    • Bachelor and/or Master’s degree in computer science and/or in engineering discipline or equivalent with hands-on experience and exposure in IT industry.
    • Experience in developing database driven web-based applications.
    • +3 years’ work experience in IT within a manufacturing environment with knowledge of production automation and control systems.
    • Experience in SQL server development.
    • Practical experience in software development using C#, ASP.NET or Java.
    • Front-End Web-Development skills with strong focus on HTML, CSS, JavaScript and JQuery.
    • Functional knowledge in production processes, quality control, plant maintenance, and inventory control.
    • Excellent communication and collaboration skills, both written and verbal.
    • Previous project experience involving Development, Configuration, Implementation of S/W applications used in production processes is considered a plus.
    • Fluency in English is required, and knowledge of other foreign languages is also considered a plus.
    • Ability to travel.

    We offer:

    • Competitive remuneration package.
    • Private health allowance.
    • Dynamic and modern environment.
    • Continuous training and development.
    code:
    Credit Control & Treasury Officer
    location : Athens, Greece 12/03/2020

    SYSTEMS SUNLIGHT S.A., a leading batteries manufacturer, worldwide, seeks to hire an

    IT Technical Consultant for Manufacturing Execution Systems (MES) Applications Development

    In the context of SYSTEMS SUNLIGHT digital transformation strategy, heading towards adopting industry 4.0 best practices for transforming its manufacturing plants in Greece and abroad into Smart Factories, Manufacturing Execution System (MES) is the basis for achieving manufacturing excellence.

    The role reports directly to the Treasurer & Credit Control Manager and is based in Athens

    Main Responsibilities:

    • Credit assessment & analysis of customers
    • Implementation of company credit policy and communication to customers and internally
    • Communication with credit insurance agencies
    • Reporting on accounts receivable and credit risk
    • Cash flow reporting and forecasting
    • Communication with financial institutions on a daily basis

    Candidate profile:

    • University degree in Accounting / Finance or Business Administration
    • At least three years of previous working experience in a similar role
    • Previous working experience in the Banking sector and familiarization with LCs, LGS, Factoring etc. will be highly appreciated
    • Outstanding attention to detail, with an ability to resolve complex issues
    • Advanced knowledge of MS Office and specially MS Excel
    • SAP knowledge desirable
    • Excellent command of the English language
    • Exceptional interpersonal and communication skills with external and internal stakeholders
    • Excellent administrative and organizational skills with demonstrated ability to multi-task and to work efficiently to meet tight timetables

    The company offers :

    • Competitive remuneration package
    • Private health allowance
    • Dynamic and modern environment
    • Continuous training and development