RfQ
Eurobat – Industrial Battery Market 2012 | Europe Middle East and Africa (EMEA)

Eurobat – Industrial Battery Market 2012 | Europe Middle East and Africa (EMEA)

REGIONS: «Wider» Europe, Middle East and Africa COUNTRIES: 72 SEGMENT: Motive and Stand-by markets PRODUCTS: 2V Cells and Mono-blocks   POLICY: a) Based on invoicing addresses b) Collection of Data every 6 months   Stand-by Market 2012 by Region – € millions   Motive Battery Market 2012 by Product Category – in ‘000 Units  ... read more
Electrolyte Circulation System (Airlift System) for Motive Power Batteries

Electrolyte Circulation System (Airlift System) for Motive Power Batteries

Electrolyte Circulation System (Airlift System) The Airlift System is used in order to stir the electrolyte inside the battery cells and prevent the occurrence of electrolyte stratification. The system consists of a thin tube that is inserted to each battery cell and a tubing network that distributes the air to all cells, thus creating a homogeneous electrolyte concentration throughout them.   Key Features of SUNLIGHT’s Airlift System Optimum design High quality materials Suitable installation of tubes in cells for perfect sealing and efficient operation   Why using an Airlift System? The battery can be fully charged in 5,5 to 7 hours, depending on charging technology No significant increase of the cell’s temperature The stratification of the electrolyte is prevented Homogeneous density and temperature is achieved The water consumption is reduced up to 60%, which extends battery’s maintenance period Overcharge coefficient is 70% lower, thus energy consumption is reduced up to 20% Longer cell life cycle is achieved due to the uniform decay of the... read more
Forklift Batteries | Technical and Quality Features

Forklift Batteries | Technical and Quality Features

SUNLIGHT Motive Power Battery – Technical and Quality Features 1. Inter-cell Connector Fully insulated flexible bolt on cable connectors Allows fast and easy cell replacement Reduces time & cost 2. Bolt Plastic-head connector bolt Touch proof insulated with voltage measurement point 3. Battery Connectors (Plugs & Sockets) Available in the following types: DIN Type connectors according to DIN 43589 Flat pole connectors with color coding 4. Exit Cables Insulated color marked cables Prevent short circuit and allow correct and fast installation 5. Tray Made of steel | Protected with plastic powder coating (standard configuration) Durability Corrosion protection Available in various sizes and colors   SUNLIGHT Motive Power Cell – Technical and Quality Features 1. Positive Plate Tubular plate design Alloy with optimized Sb (antimony) concentration Red Lead in-house production by Pure Lead 99,99% Dry Filling with Red Lead Increased gauntlet diameter Stable cycling performance and longer service life Lower water consumption, lower temperature increase, high and stable final charging voltage, less corrosion 100% of nominal capacity in the first 3-5 cycles Increased capacity 2. Negative Plate Pasted lead grid & advanced Negative Active Mass (NAM) composition Alloy with optimized Sb (antimony) concentration Stable cycling performance Lower water consumption 3. Separator Polyethylene roll separator with high porosity grade material envelopes the positive plates Electrical resistance improved by up to 20% over conventional separators High porosity enables superior battery capacity Acid displacement decreased by 15% resulting in higher capacity High oxidation resistance and high porosity ensures longer service life Short circuits avoided 4. Gauntlet Reinforced non-woven polyester material with high fibers bonding and smaller pore’ s size Better utilization of active material Eliminates active mass shedding... read more